PA677798

[L40 Ultra AE] Problem with returning to the dock

The robot cannot return itself to the dock. None of the issues described in the manual are applicable.
How to fix the issue.
U moet inloggen om te kunnen antwoorden. Inloggen | Register

2 Reactie

tqt 1 Verdieping
Does the robot find the dock but fail when trying to enter it, or does it wander around without finding it?
Dreame Support NL 2 Verdieping
Hello, to assist you better, please kindly follow the troubleshooting steps below:

1. Check for any foreign objects or dust on the robot’s charging contacts. If they are covered in dust, this will cause repeated connection failures with the charging dock. Clean them before use.
2. Check to see if any of the metal parts on the charging contacts are stuck.
3. Restart the robot, remove it from the charging dock, and try charging it again. Check to see if you hear the voice prompt “Starting to charge.”
4. Restart the robot. Open the robot’s top cover; there is a small reset hole on the side, near the Wi-Fi indicator. Press and hold it for 3 seconds until you hear the voice prompt “Starting factory reset.” Then turn on the robot to check if it is working normally.
*Please note that resetting the device will erase all data, including any maps you have created. We apologize for any inconvenience this may cause.

If the problem persists, we recommend that you send a photo of the device’s serial number (S/N) and the receipt, along with the test results and a video of the problem, to our customer service team (email: support.benelux@dreame.tech) so we can investigate the issue further.
重置.png
UID:PA677798 NL
  • 1Berichten
  • 0Vrienden

© 2026 Dreame Forum All Rights Reserved | Support by Discuz! X5.0 Font by MiSans

Snel antwoorden Terug naar boven Ga terug naar lijst