VF835186

[X50 Master] Poor navigation on firmware 4.3.9_3684 – Rollback or developer collaboration?

Hello Dreame team,

I recently purchased a Dreame X50 Master, and while I'm extremely impressed with the automatic cleaning station and the overall hardware, I'm quite disappointed with its navigation behaviour.


Device information:

  • Model: Dreame X50 Master

  • Firmware: 4.3.9_3684

  • Floor: Large 100 × 100 cm ceramic tiles

  • Cleaning mode: Vacuum only, without CleanGenius

  • Initial mapping: Completed using Quick Mapping




The problem:
In Standard cleaning mode, the robot follows extremely inefficient and chaotic cleaning patterns.
It appears to react to the tile joints, even though these are barely visible. At certain intersections, it rotates unnecessarily, changes direction repeatedly and drives diagonally across the tiles instead of following systematic parallel cleaning paths.
The resulting cleaning map looks more like random navigation than an optimized coverage algorithm.
Interestingly, in Fast cleaning mode, the robot follows much more logical and efficient paths. However, this mode does not adequately clean corners and edges.
This suggests a possible issue with the navigation or obstacle-detection software rather than a fundamental hardware limitation.


My questions to Dreame:

  • Is this a known issue with firmware 4.3.9_3684?

  • Is it possible to roll back to a previous, more stable firmware version?

  • Is a firmware update planned to improve navigation and coverage efficiency?

  • Does Dreame offer any beta testing or developer collaboration opportunities?



I'm willing to help.
I work professionally in software development, industrial automation and robotics, including robot motion, geometry processing and path-planning applications.
I would be happy to participate in firmware beta testing, provide detailed navigation logs, reproduce issues under controlled conditions or contribute technical feedback to improve the cleaning algorithms.


I believe the X50 Master has excellent hardware potential, but its navigation software currently doesn't live up to the expectations of a premium product.
I genuinely want to keep this robot, especially because the automatic station works exceptionally well. However, if the navigation cannot be improved, I may have to consider returning it.
I have attached a screenshot showing the unusual cleaning pattern.


Could someone from Dreame's firmware or navigation development team look into this?
Thank you!
U moet inloggen om te kunnen antwoorden. Inloggen | Register

1 Reactie

Dreame Support NL 1 Verdieping
Hello,

Thanks for sharing your experience with us. We are glad to hear that you are impressed with the auto-clean station and the hardware as a whole; however, we sincerely apologize for your disappointment regarding the robot's navigation.

It is not yet clear whether the navigation issues are a result of a firmware update, as we have rarely received similar reports from other users. That said, if you believe the navigation problems are linked to a specific firmware version, please feel free to send us your robot's serial number (SN) via a private message.

In the meantime, we will share your feedback with our technical team.

Thank you once again for your support of Dreame—we truly value your feedback.
UID:VF835186 NL
  • 1Berichten
  • 0Vrienden

© 2026 Dreame Forum All Rights Reserved | Support by Discuz! X5.0 Font by MiSans

Snel antwoorden Terug naar boven Ga terug naar lijst